Home > Products > High Speed Injection Molding Machine > 310 tons injection molding machine
310 tons injection molding machine
  • 310 tons injection molding machine310 tons injection molding machine
  • 310 tons injection molding machine310 tons injection molding machine
  • 310 tons injection molding machine310 tons injection molding machine

310 tons injection molding machine

The ZOWEITE® 310 tons injection molding machine is a high speed, servo injection molding machine. Its high response oil-electric servo system cooperates with slide rail to project a rigid support structure. The unique stable high pressure and high speed injection system of high speed injection molding machine is suitable for molding broader products, such as thin walled food containers, plastic cups, flower pots and other thin walled packing products. 310tons has high quality, stable operation, low failure rate, easy maintenance and repair.

Send Inquiry

Product Description

The ZOWEITE® 310 tons injection molding machine is a high speed, servo injection molding machine. Its high response oil-electric servo system cooperates with slide rail to project a rigid support structure. The unique stable high pressure and high speed injection system of high speed injection molding machine is suitable for molding broader products, such as thin walled food containers, plastic cups, flower pots and other thin walled packing products. 310tons has high quality, stable operation, low failure rate, easy maintenance and repair.


310 tons injection molding machine


Main items of injection molding before mold test of 310 tons injection molding machine:

1.Understand the relevant information of the mold: 

It is best to obtain the design drawing of the mold, analyze it in detail, and invite the mold technician to participate in the mold test.

2.First check and mechanical cooperation on the workbench:

Pay attention to whether there are scratches, missing parts and looseness, whether the action of the die towards the sliding plate is correct, whether there is leakage at the water channel and air pipe joints, and if the opening range of the die is limited, it should also be indicated on the die. If the above actions can be done before hanging the die, the waste of man hours caused by finding problems during hanging the die and then dismantling the die can be avoided.

310 tons injection molding machine


3.When it is determined that all parts of the mold act properly, it is necessary to select a suitable mold test ejector. During the selection, pay attention to:

(1)What is the maximum output of ZOWEITE® 310 tons injection molding machine

(2)Is the inner distance of the pull rod placed on the lower die

(3)Whether the maximum moving stroke of the movable template meets the requirements

(4)Whether other tools and accessories required for mold test are ready.

4.Increase the mold temperature

According to the performance of raw materials used in the product and the size of the mold, an appropriate mold temperature controller is selected to increase the temperature of the mold to the temperature required for production. After the mold temperature increases, the action of each part must be checked again, because the clamping phenomenon may be caused after thermal expansion just now. Therefore, pay attention to the sliding of each part to avoid strain and vibration.

310 tons injection molding machine


5.If the factory does not implement the principle of experimental plan, we suggest that only one condition can be adjusted at a time when adjusting the mold test conditions, so as to distinguish the impact of a single condition change on the finished product

6. According to different raw materials, bake the raw materials appropriately

7.Try to use the raw materials required for the production of products in the future.

8.Do not test the mold completely with secondary materials. If there is a color demand, the color test can be arranged together.

9.The internal stress of 310 tons injection molding machine and other problems affect the secondary processing. The secondary processing should be carried out after the mold test and after the finished product is stable. After the mold is closed slowly, adjust the mold closing pressure and act several times to check whether there is uneven clamping pressure, so as to avoid burrs and mold deformation of the finished product.

310 tons injection molding machine parameter:


310 tons injection molding machine


ZOWEITE have 30 years experience in this industry and our factory got SGS/ISO certificate. We can provide Turn-key project for customers according customers requirements, including machine, mold, auxiliary equipment and plant design. We are in good position not only to supply customer high quality and stable machinery, but also the excellent after sales service. Well-trained engineers will offer you any technical support.

ZOWEITE factory:

310 tons injection molding machine

310 tons injection molding machine

Hot Tags: 310 tons injection molding machine, Suppliers, Manufacturers, Factory, China, Made in China, Price, Price List, Quotation, Quality, Advanced, Easy-maintainable, 1 Year Warranty
Related Category
Send Inquiry
Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept