Thin-wall Packaging Injection Molding Machine

Shorter cycle times means higher productivity and lower costs per part.The definition of thin wall is really about the size of the part compared to its wall thickness. For any particular plastic part, as the wall thickness reduces the harder it is to manufacture using the injection molding process. The size of a part puts a limit on how thin the wall thickness can be. For packaging containers thin wall means wall thicknesses that are less than 0.025 inch (0.62mm) with a flow length to wall thickness greater than 200.

This series is suitable for high-speed injection molding and labeling of fast food boxes, milk tea cups, flower pots, and other thin-wall packaging containers. ZOWEITE® thin-wall series injection molding machine machine have GF280KC、GF360KC、GF460KC、GF580KC

What are the advantages and characteristics of thin-wall packaging injection molding machine?

Thin-wall packaging injection molding machine has the characteristics of precision, energy saving, low cost, stability and high efficiency. In the production process of thin-wall packaging injection molding machine , the precision, stable and efficient machine platform is a powerful guarantee for the continuous high-speed operation of the machine. The mechanical components of the thin-wall packaging injection molding machine are designed around high rigidity, which is more durable. The high-strength mechanical platform increases the stability of the machine operation. According to different configurations and the needs of molding process, the thin-wall packaging injection molding machine can fully meet the process needs of lunch boxes, milk tea cups, flower pots and other thin-walled products.

Difference between thin-wall packaging injection molding machine and ordinary injection molding machine?

● Thin-wall packaging injection molding machine is high efficiency, ordinary injection molding process is: mode locking —— cooling —— storage —— open mode —— support model —— gap time; high-speed injection molding machine adopts three-axis linkage, generally speaking as three circuits.The forming process is: —— cooling —— open mode (synchronous mold, storage) —— clearance time.For example, the molding time of an ordinary injection molding machine is 10 seconds, while the high-speed injection molding machine uses the principle of three-axis linkage, and the molding time is greatly shortened to about 6 seconds, minus two small steps, but increasing the time speed by about half.

● Thin-wall packaging injection molding machine is environmentally friendly. The standard pump used by ordinary injection molding machine has greater pollution in electric power, hydraulic oil and noise.High-speed injection molding machine adopts the oil-electric mixture of oil pump and servo motor.

● The servo hydraulic system is as follows: soft start mold will not affect the power network and avoid pollution from voltage and irradiation.Can effectively prevent the oil temperature is too high, good cooling.To greatly reduce the replacement rate of the hydraulic oil. Servo hydraulic system has good clicks and power system gear pump, which can greatly reduce the machine operation and production noise and improve the working environment.

For different customers, ZOWEITE® can customize different equipment schemes. Finally, ZOWEITE can provide the Turn-key project for customers, from the early plant layout and planning, machine selection and auxiliary supporting to the production line commissioning and personnel training to the smooth off-line of products. Whether it is hardware or software, ZOWEITE® thin-wall packaging injection molding machine can provide for customers with a comprehensive and detailed scheme.

If you have any question, please feel free to contact me.