> News

News

Three advantage of servo in injection molding machine

During the molding process of the injection molding machine, different frequency outputs are produced for different pressure flows,and the pressure flow is accurately closed-loop controlled to realize the servo motor.

Causes of common injection molding defects and solutions.

Burr is caused by the overflow of molten injection resin from the parting surface of the mold, which is a bad state in the forming operation. Especially when the burr is firmly adhered to the parting surface of the die for die locking, it will damage the parting surface of the die.

How to maintain injection molding machine in daily life?

Possible faults of injection molding machine. Failure cause of die locking structure and prevention of hinge fracture. Excessive clamping force、Poor operation 、Insufficient lubrication、Poor design

Special injection molding machine for oil drum

The special injection molding machine for oil drums is developmend for the more popular injection molding products in the market, and has a unique mechnical structure design for the products.

Maintenance of injection molding machine barrel

When the temperature of the barrel of the injection molding machine does not reach the preset temperature, do not start the machine for the time being. Secondly, each kind of plastic has an ideal plasticizing processing temperature range.

How to choose high speed thin wall injection molding machine?

High speed thin wall injection molding machine can inject all kinds of food containers, milk tea cups, sauce caps, yogurt caps, spoon, knife, fork, etc, which can be widely used in food packing industry.

<...11 12 13 14 15...17 >